Telit Wireless Solutions LE910C series - AT+FCLASS - Select Active Service Class

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 72 of 1904 2022-03-04
Not Subject to NDA
3.1.3. AT+FCLASS - Select Active Service Class
This command sets the wireless module in specified connection mode (data, voice),
hence all the calls done afterwards will be data or voice.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT+FCLASS=<n>
Parameter:
Name
Type
Default
Description
<n>
integer
0
type of call
Values:
0
:
data type
8
:
voice type
AT+FCLASS?
Read command returns the current configuration value of the parameter
<n>.
AT+FCLASS=?
Test command returns all supported values of the parameters <n>.