Telit Wireless Solutions LE910C series - AT#SIMINCFG - SIMIN Pin Configuration

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 900 of 1904 2022-03-04
Not Subject to NDA
3.10.20. AT#SIMINCFG - SIMIN Pin Configuration
This command allows to set the SIMIN pin status for SIM detection.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#SIMINCFG=<GPIOPin>,<siminDetMode>
Set command sets SIMIN pin status for SIM detection.
Parameters:
Name
Type
Default
Description
<GPIOPin>
integer
-
number of the GPIO pin used as
SIMIN pin. Actually, it is a dummy
parameter that is not used.
<siminDetMode>
integer
0
status of SIMIN pin for SIM
detection
Values:
0
:
SIMIN pin LOW means SIM inserted. HIGH
means SIM removed.
1
:
SIMIN pin LOW means SIM removed. HIGH
means SIM inserted.
AT#SIMINCFG?
Read command reports the selected SIMIN pin status in the format:
#SIMINCFG: 0,<siminDetMode>
AT#SIMINCFG=?