Telit Wireless Solutions LE910C series - AT#RXTOGGLE - Swap RX from Main to Diversity

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1180 of 1904 2022-03-04
Not Subject to NDA
3.15.31. AT#RXTOGGLE - Swap RX from Main to Diversity
This command swaps the receiver from the main antenna to the diversity antenna.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#RXTOGGLE=<TOGGLE_enable>
Parameter:
Name
Type
Default
Description
<TOGGLE_enable>
integer
2
toggle between normal to
diversity antenna
Values:
0
:
set the RX to the main antenna
1
:
set the RX to the diversity antenna
2
:
set the RX to both the main and the
diversity antennas
Please disable usage of two antennas (AT#RXDIV=0) before
swapping antennas.
The values set by command are directly stored in NVM.
They are available at next power on.(Solution provider's
Limitation.)
AT#RXTOGGLE?
Read command reports the currently selected <TOGGLE_enable> in the
format: