Telit Wireless Solutions LE910C series - A; - Last Command Automatic Repetition

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 112 of 1904 2022-03-04
Not Subject to NDA
3.2.1.2. A/ - Last Command Automatic Repetition
The command immediately executes the previously issued command or commands.
ITU-T Recommendation V.25 ter
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
A/
If the prefix A/ is issued, the device immediately executes once again the
body of the preceding command line. No editing is possible, and no
termination character is necessary. A command line may be repeated
multiple times through this mechanism, if desired.
If A/ is issued before any command line has been executed, the
preceding command line is assumed to have been empty (that results in
an OK result code).
This command works only at fixed IPR.
The custom prefix AT#/ has been defined: it causes the last
command to be executed again too; but it doesn’t need a fixed
+IPR.