Telit Wireless Solutions LE910C series - AT#WLANSIGNAL - Return Signal Strength of the Network

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 722 of 1904 2022-03-04
Not Subject to NDA
3.8.6. AT#WLANSIGNAL - Return signal strength of the network
This command returns the signal strength of the connected network.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#WLANSIGNAL
Executing this command returns the signal strength of the connected
network.
AT#WLANSIGNAL=?
Test command returns OK.