Telit Wireless Solutions LE910C series - AT#FWTDEVICESET - Set FWT Device for Enabling 911 Calling

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 253 of 1904 2022-03-04
Not Subject to NDA
3.2.2.82. AT#FWTDEVICESET - Set FWT device for enabling 911 calling
Set FWT device for enabling 911 calling.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#FWTDEVICESET=<mode>
This command is used to set FWT(Fixed Wireless Terminal) device for
enabling 911 calling.
Parameter:
Name
Type
Default
Description
<mode>
integer
0
enable or disable FWT deivces for enabling
911 calling.
Values:
0
:
Disable 911 calling on FWT devices
1
:
Enable 911 calling on FWT devices
This command is for Verizon and the UE shall include following
proprietary headers in the SIP INVITE:
P-Com.ServiceType: Static-Emergency
P-com.E911ServiceType: VZWFreedom
This command is only available when using "VZWFreedom" which
is the specified service type of emergency call on the FWT device.
Even if this command is not set, there is no affect when using
emergency calls or general voice calls.