Telit Wireless Solutions LE910C series - AT+ILRR - DTE-Modem Local Rate Reporting

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 325 of 1904 2022-03-04
Not Subject to NDA
3.2.4.22. AT+ILRR - DTE-Modem Local Rate Reporting
This command controls whether or not the +ILRR: <rate> information text transmitted
from the modem (module) to the DTE.
ITU-T Recommendation V.25 ter
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
Yes
-
2
AT+ILRR=<n>
Set command controls whether or not the +ILRR: <rate> information text
transmitted from the modem (module) to the DTE.
Parameter:
Name
Type
Default
Description
<n>
integer
0
local port speed rate reporting
Values:
0
:
local port speed rate reporting disabled
1
:
local port speed rate reporting enabled
This information if enabled sent upon connection.
AT+ILRR?
Read command returns active setting of <n>.
AT+ILRR=?