Telit Wireless Solutions LE910C series - ATV - Response Format

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 287 of 1904 2022-03-04
Not Subject to NDA
3.2.4.3. ATV - Response Format
This command allows to set format of information responses and result codes.
[1] ITU-T Recommendation V.25 ter
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
ATV[<n>]
Set command determines the contents of the header and
trailer transmitted with result codes and information responses. It
also determines if result codes are transmitted in a numeric form or
an alphanumeric form (according to [1]).
Parameter:
Name
Type
Default
Description
<n>
integer
1
format of information responses and result
codes. See Additional info section.
Values:
0
:
limited headers and trailers and numeric format of
result codes
1
:
full headers and trailers and verbose format of result
codes
Additional info:
<n>=0
information responses
<text><CR><LF>
result codes
<numericCode><CR>