Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1879 of 1904 2022-03-04
Not Subject to NDA
3.35.24. AT#BSSPPIN - BLE Secure Simple Pairing PIN (SSP-PIN)
This command is used for BLE Secure Simple Pairing PIN (SSP-PIN).
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#BSSPPIN=<Bluetooth Address>,<Bluetooth Address Type>,<SSP
Passkey>
Set command is used to generate SSPPIN during authentication.
When authentication is initiated, depending on the I/O capabilities the AT
interface generates an event SSPPIN and asks the user for the SSP
passkey.
Asynchronous Event: #SSPPIN:<Bluetooth address>,<,address type>,<?>
The user must answer this request with the SSP passkey displayed on the
remote device. The passkey generated by the remote device is a six-digit
pin which the user cannot modify.
Parameters:
Name
Type
Default
Description
<Bluetooth
Address>
string
N/A
It specifies the remote Bluetooth
address.
Value:
1÷48
:
The supported parameter value range.
<Bluetooth
Address Type>
string
N/A
It specifies the remote Bluetooth
address type.
Where,
t2 - public address,
t3 - random address.
Value:

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English