Telit Wireless Solutions LE910C series - AT#EPASSW - E-Mail Authentication Password

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1407 of 1904 2022-03-04
Not Subject to NDA
3.19.12. AT#EPASSW - E-mail Authentication Password
This command sets the password string to be used during the authentication step of the
SMTP.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#EPASSW=[<ePwd>]
Parameter:
Name
Type
Default
Description
<ePwd>
string
""
e-mail authentication password that can
have any string value up to max length
reported by test command
Value:
""
:
factory default
If no authentication is required then the <ePwd> parameter shall
be empty "".
AT#EPASSW=?
Test command returns the maximum allowed length of the string
parameter <ePwd>.
AT#EPASSW="myPassword"
OK