To Next Page

To Previous Page

LE910Cx AT Commands Reference Guide

80502ST10950A Rev. 14 Page 161 of 1904 2022-03-04

Not Subject to NDA

3.2.2.34. AT+CPUC - Price per Unit and Currency Table

This command sets the values of Price per Unit and Currency Table.

3GPP TS 27.007

SIM Presence

Setting saved

Can be aborted

MAX timeout

SELINT

Required

AT+CPUC=<currency>,<ppu>[,<pwd>]

Set command sets the values of Advice of Charge related Price per Unit

and Currency Table (PUCT) stored in SIM. The PUCT information can be

used to convert the home units (as used in commands +CAOC, +CACM and

+CAMM) into currency units. SIM PIN2 is usually required to set the

parameters.

Parameters:

Name

Type

Default

Description

string

three-character currency code (e.g.

"GBP", "DEM", "USD"); character set as

specified by command select TE

character set +CSCS

<ppu>

string

price per unit; dot is used as a decimal

separator (e.g. "2.66")

<pwd>

string

SIM PIN2

AT+CPUC?

Read command reports the current values of <currency> and <ppu>

parameters in the format:

Telit Wireless Solutions LE910C series At Commands Reference Guide

Other manuals for Telit Wireless Solutions LE910C series