Telit Wireless Solutions LE910C series - AT#OVERRIDEPDP - Set the Default PDP Type for LTE in Home Network or Roaming Network

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 177 of 1904 2022-03-04
Not Subject to NDA
3.2.2.43. AT#OVERRIDEPDP - Set the default PDP type for LTE in home network or
roaming network
Set the default PDP type for LTE in home network or roaming network.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#OVERRIDEPDP=<cid>,<network_type>,<PDP_type>
Set command configures the default PDP type for LTE in home network or
roaming network.
Parameters:
Name
Type
Default
Description
<cid>
integer
N/A
(PDP Context Identifier) numeric
parameter which specifies a
particular PDP context definition.
Value:
1÷max
:
where the value of max is returned by
the Test command
<network_type>
integer
N/A
specifies a particular network type
definition.
Values:
0
:
LTE Home Network
1
:
LTE Roaming Network
<PDP_type>
string
N/A
specifies the type of packet data
protocol.
Values:
"IP"
:
Internet Protocol