Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1348 of 1904 2022-03-04
Not Subject to NDA
3.17.53. AT#TCPREASS - TCP Reassembly
This command sets enables/disables the TCP Reassembly feature.
In TCP/IP, packets can be fragmented according to the specification, so it is necessary to
reassemble the fragmented packet in the TCP/IP stack layer.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#TCPREASS=<n>
Set command enables/disables the TCP reassembly feature, in order to
handle fragmented TCP packets.
Parameter:
Name
Type
Default
Description
<n>
integer
1
Enable TCP reassembly feature.
Value:
1
:
Enable TCP reassembly feature
Additional info:
Disable TCP reassembly feature is not supported.
AT#TCPREASS?
Read command returns whether the TCP reassembly feature is enabled or
not, in the format:
#TCPREASS:<n>

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English