Telit Wireless Solutions LE910C series - AT#RNDISD - Remote Network Driver Interface Specification Shutdown

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1209 of 1904 2022-03-04
Not Subject to NDA
3.16.1.6. AT#RNDISD - Remote Network Driver Interface Specification shutdown
This command is used to shutdown a Remote Network Driver Interface Specification
(RNDIS) session.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#RNDISD=<Did>
This command is used to shutdown a Remote Network Driver Interface
Specification (RNDIS) session.
Parameter:
Name
Type
Default
Description
<Did>
integer
-
Device id, currently limited to 0 (only one
device)
This command also deactivates the PDP context.
If backhaul is not connected yet, Returns OK
AT#RNDISD?
Read command returns the session state in the following format:
Additional info:
#RNDISD: <Did>,<State>
...
OK
Name
Type
Default
Description