Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 147 of 1904 2022-03-04
Not Subject to NDA
3.2.2.29. AT+CFUN - Set Phone Functionality
This command selects the level of functionality in the ME.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT+CFUN=[<fun>[,<rst>]]
Set command selects the level of functionality in the ME.
Parameters:
Name
Type
Default
Description
<fun>
integer
1
Power saving function
mode.
Values:
0
:
NON-CYCLIC SLEEP mode, see Additional info section.
1
:
mobile full functionality with power saving disabled.
2
:
disable TX, not supported
4
:
disable both TX and RX
5
:
mobile full functionality with power saving enabled
6
:
module reboot
7
:
OFF line mode. This mode cannot be set, can only be
read using the read command.
8
:
FTM. This mode cannot be set, can only be read using
the read command.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English