Telit Wireless Solutions LE910C series - Page 146

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 146 of 1904 2022-03-04
Not Subject to NDA
4
:
call in progress (device is ready for commands
from TA/TE, but a call is in progress)
'1' and '2' at <pas> is not supported.
In the LTE registration state, CPAS: 4 (call in progress) is
displayed.
AT+CPAS=?
Test command reports the supported range of values for <pas>.
Although +CPAS is an execution command, 3GPP TS 27.007
requires the Test command to be defined.