Telit Wireless Solutions LE910C series - AT#FTPOPEN - FTP Connection Opening

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1370 of 1904 2022-03-04
Not Subject to NDA
3.18.10. AT#FTPOPEN - FTP Connection Opening
This execution command opens an FTP connection toward the FTP server.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#FTPOPEN=[<server:port>,<username>,<password>[,<mode>]]
Execution command opens an FTP connection toward the FTP server.
Parameters:
Name
Type
Default
Description
<server:port>
string
-
address and port of FTP server
(factory default port 21), in the format:
“ipv4” / “ipv4:port”
“ipv6” / “[ipv6]” / “[ipv6]:port”
“dynamic_name” /
“dynamic_name:port”
<username>
string
-
authentication user identification for
FTP
<password>
string
-
authentication password for FTP
<mode>
integer
0
active or passive mode
Values:
0
:
active mode
1
:
passive mode
In FTP Open case, the solution dependency limits the maximum
time out to 1200 (120 seconds). The FTPTO value that exceed 1200
is considered as 1200.