Telit Wireless Solutions LE910C series - AT#SECIFCFG - Secure Interface Configuration

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 229 of 1904 2022-03-04
Not Subject to NDA
3.2.2.68. AT#SECIFCFG - Secure Interface Configuration
This command allows to set the interface secured and non-secured.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#SECIFCFG=<sec_mask>,<pwd>
Set command set the interface secured and non-secured.
Parameters:
Name
Type
Default
Description
<sec_mask>
integer
0
secure mask value
Values:
0
:
No secure interface (No secure on all interface)
1
:
Serial AT interface (Secure AT access via USB,
UART)
2
:
Remote AT interface (Secure AT access via
TCP/IP, SMS)
3
:
Serial and Remote AT interface (Secure AT access
via USB, UART, TCP/IP, SMS)
<pwd>
string
-
The credentials are 10 ~ 16 characters
and alphanumeric with capitals
complexity.
Additional info:
Once Interface secure enabled, all AT command is not available
except for secure AT commands #SECIFCFG, #SECIFAUTH and
#SECIFPWD until interface access is authenticated.