Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 201 of 1904 2022-03-04
Not Subject to NDA
3.2.2.53. AT#CMUXMODE - CMUX Mode Set
The module is equipped with the CMUX standard protocol to provide multiplexing
features. The #CMUXMODE command configures the CMUX behavior concerning the
DTR control line, and the size of the internal output CMUX buffer.
3GPP TS 27.010
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#CMUXMODE=<mode>
Set command specifics the CMUX mode
Parameter:
Name
Type
Default
Description
<mode>
integer
0
defines the DCE behavior when a
transition occurs on the physical DTR
control line.
Values:
0
:
Ignore DTR feature is disabled, a transmission of the
physical DTR line instructs the DCE to disable the
CMUX and switches to the normal command mode
1
:
Ignore DTR feature is disabled, a transmission of the
physical DTR line instructs the DCE to disable the
CMUX and switches to the normal command mode
5
:
Ignore DTR feature is enabled, the DCE doesn’t care
the physical DTR line transitions

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English