Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 200 of 1904 2022-03-04
Not Subject to NDA
Note: the Length Indicator of the information field is fixed to 1
octet.
Note: E/A Bit of the Length Indicator should be set to 1 (length <=
127).
AT+CMUX?
Read command returns the current value of <mode> and <subset>
parameters, when M2M AT Parser disabled (AT#M2MATP=0) or M2M AT
Parser not supported model in the format:
+CMUX: <mode>,<subset>
Read command returns the current value of <mode>, <subset>,
<port_speed> and <N1>
parameters, when M2M AT Parser enabled (AT#M2MATP=1) in the format:
+CMUX: <mode>,<subset>,<port_speed>,<N1>
AT+CMUX=?
Test command returns the range of supported values for parameters
<mode> and <subset> when M2M AT Parser disabled (AT#M2MATP=0) or
M2M AT Parser not supported model.
Test command returns the range of supported values for parameters
<mode>, <subset>, <port_speed> and <N1>. when M2M AT Parser disabled
(AT#M2MATP=1).

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English