Telit Wireless Solutions LE910C series - AT+CGCLASS - GPRS Mobile Station Class

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 773 of 1904 2022-03-04
Not Subject to NDA
3.9.3. AT+CGCLASS - GPRS Mobile Station Class
This command sets the GPRS class.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT+CGCLASS=[<class>]
Set command sets the GPRS class according to <class> parameter.
Parameter:
Name
Type
Default
Description
<class>
string
"A"
GPRS class
Values:
"A"
:
Class-A mode of operation (A/Gb mode), or CS/PS
mode of operation (Iu mode) (factory default)
"B"
:
Class-B mode of operation (A/Gb mode), or CS/PS
mode of operation (Iu mode)
"CG"
:
Class-C mode of operation in PS only mode (A/Gb
mode), or PS mode of operation (Iu mode)
"CC"
:
Class-C mode of operation in CS only mode (A/Gb
mode), or CS (Iu mode)
AT+CGCLASS?
Read command returns the mode of operation set by the TE, in the format:
+CGLASS: <class>