Telit Wireless Solutions LE910C series - AT#CSURVU - Network Survey of User Defined Channels

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1496 of 1904 2022-03-04
Not Subject to NDA
3.22.9. AT#CSURVU - Network Survey of User Defined Channels
This command allows performing a quick survey through the given channels.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
Yes
-
2
AT#CSURVU=[<ch1>[,...[,<chN>]]]
Set command allows performing a quick survey through the given
channels. The range of available channels depends on the last #BND
issue.
The result format is like command #CSURV.
In 4G (partly implemented)
Currently work only if module camped on LTE cell.
Parameter:
Name
Type
Default
Description
<ch1>...<chN>
integer
-
channel number (ARFCN (in case of
2G), UARFCN (in case of 3G), EARFCN
(in case of 4G))
Max value of N is 10.
the <chn> must be selected in same RAT.
The command is executed within max. 2 minute.