Telit Wireless Solutions LE910C series - AT#SSLH - Close a SSL Socket

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1434 of 1904 2022-03-04
Not Subject to NDA
3.21.4. AT#SSLH - Close a SSL Socket
This command allows closing the SSL connection.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SSLH=<SSId>[,<ClosureType>]
Parameters:
Name
Type
Default
Description
<SSId>
integer
1
Secure Socket Identifier
Value:
1
:
only one socket is available
<ClosureType>
integer
0
type of socket closure.
Value:
0
:
only value 0 is supported
If secure socket has not be enabled through #SSLEN command,
only test command can be used.
AT#SSLH=?
Test command returns the range of supported values for all the
parameters:
#SSLH: (1),(0)