Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 241 of 1904 2022-03-04
Not Subject to NDA
3.2.2.74. AT#PDPAUTH - PDP Authentication Parameters
This set command specifies PDP authentication parameters values for a PDP context
identified by the (local) context identification parameter <cid>.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#PDPAUTH=<cid>,<auth_type>,[<username>,[<password>]]
Set command specifies PDP authentication parameters values for a PDP
context identified by the (local) context identification parameter <cid>.
Parameters:
Name
Type
Default
Description
<cid>
integer
N/A
context identifier
Value:
1÷max
:
specifies a particular PDP context definition.
The value of max is returned by the Test
command.
<auth_type>
integer
0
authentication type
Values:
0
:
no authentication
1
:
PAP authentication
2
:
CHAP authentication
<username>
string
-
supplied by network provider.
Required for <auth_type> = 1 and 2
<password>
string
-
supplied by network provider.
Required for <auth_type> = 1 and 2.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English