Telit Wireless Solutions LE910C series - AT#APPSKTCFG - Configure Socket Parameters

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1390 of 1904 2022-03-04
Not Subject to NDA
3.19.2. AT#APPSKTCFG - Configure Socket Parameters
This command sets the parameters needed to socket services (FTP, SMTP, HTTP).
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#APPSKTCFG=<connTo>[,<UNUSED_1>[,<UNUSED_2>[,<UNUSED_3>[,<UNUS
ED_4>]]]]
Set command sets the parameters needed to socket services (FTP, SMTP, HTTP)
Parameters:
Name
Type
Default
Description
<connTo>
integer
0
connection timeout. If a connection
can not be established to the remote
host within this period, an error is
raised.
Values:
0
:
internal stack timeout value
10÷1200
:
timeout value in hundreds of milliseconds
<UNUSED_1>
integer
-
reserved for future use
<UNUSED_2>
integer
-
reserved for future use
<UNUSED_3>
integer
-
reserved for future use
<UNUSED_4>
integer
-
reserved for future use
values are automatically saved in NVM.
AT#APPSKTCFG?