Telit Wireless Solutions LE910C series - AT$GPSGLO - Set the GLONASS Capability

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1732 of 1904 2022-03-04
Not Subject to NDA
3.28.3.8. AT$GPSGLO - Set the GLONASS Capability
This command selects the GLONASS capability used.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$GPSGLO=<type>
Set command selects the GLONASS capability used.
Parameter:
Name
Type
Default
Description
<type>
string
1
enables/disables GLONASS capability.
Values:
0
:
Disable GLONASS
1
:
Enable GLONASS
This command is saved in NVM and has effect only at the next
power cycle.
AT$GPSGLO?
Read command returns the currently used GLONASS, in the format:
$GPSGLO: <type>
AT$GPSGLO=?
Test command reports the range of supported values for parameter
<type>.