Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1801 of 1904 2022-03-04
Not Subject to NDA
3.32.12. AT#MQREAD - Read Messages Received from the MQTT Broker
This command reads the message payload from the queue slot provided.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#MQREAD=<instance_number>,<message_id>
After command line is terminated with <CR>, the module responds
sending:
#MQREAD: <instanceNumber>,<topic>,<payload_len>,
then the module prompts the following characters sequence:
<less_than><less_than><less_than><carriage return><line feed> (IRA 60,
60, 60, 13, 10)
followed by the data
Parameters:
Name
Type
Default
Description
<instance_number>
integer
N/A
Selects the client instance to
activate or deactivate
Value:
1÷maxClients
:
client instance range. to know
maxClients value use test
command
<message_id>
integer
N/A
Message slot Id to be read. The
read operation will free the slot
resource.
Value:
1÷30
:
message slot Id range
Additional info:

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English