Telit Wireless Solutions LE910C series - AT$NMEA - Enable NMEA Stream

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1743 of 1904 2022-03-04
Not Subject to NDA
3.28.4.3. AT$NMEA - Enable NMEA Stream
This command configures to enable NMEA Stream.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT$NMEA=<n>
This command enables/disables the NMEA 0183 standard stream inside
the module.
Sets the ability to enable or disable the NMEA stream.
Allows NMEA 0183 Sentences:
$GPGGA, $GPGSA, $GPGSV, $GPRMC and $GPVTG
Parameter:
Name
Type
Default
Description
<n>
integer
N/A
mode
Values:
0
:
Disable the NMEA 0183 standard stream
1
:
Enable the NMEA 0183 standard stream
AT$NMEA=?
Read command returns the current value of the <n> parameter, in the
format:
$NMEA: <n>