Telit Wireless Solutions LE910C series - ATZ - Soft Reset

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 116 of 1904 2022-03-04
Not Subject to NDA
3.2.2.3. ATZ - Soft Reset
Soft Reset
ITU-T Recommendation V.25 ter
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
ATZ[<n>]
Execution command loads the base section of the specified user profile
and the extended section of the default factory profile
Parameter:
Name
Type
Default
Description
<n>
integer
N/A
user profile number
Value:
0,1
:
user profile number
If parameter <n> is omitted, the command has the same behavior
as ATZ0
Any active call is terminated.