Telit Wireless Solutions LE910C series - AT#STSR - SIM Toolkit Send Response

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 951 of 1904 2022-03-04
Not Subject to NDA
3.11.3. AT#STSR - SIM Toolkit Send Response
This command allows the user to provide a response to confirm the execution of the
ongoing proactive command.
3GPP TS 31.111
Telit SIM/USIM Toolkit Application Note
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#STSR=[<cmdType>[,<userAction>[,<data>]]]
Set command allows the user to provide a response action to the ongoing
proactive command when the action is required by the command itself.
Parameters:
Name
Type
Default
Description
<cmdType>
integer
-
proactive command code, refer to
#STGI command to have information
on the <cmdType>
<userAction>
integer
0
identify the user action
Values:
0
:
the user accepts the ongoing proactive
command
16
:
proactive SIM/USIM session terminated by user
17
:
backward move in the proactive SIM/USIM
session requested by the user
18
:
no response from user
19
:
help information required by the user