Telit Wireless Solutions LE910C series - AT#PADFWD - PAD Forward Character

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1268 of 1904 2022-03-04
Not Subject to NDA
3.17.20. AT#PADFWD - PAD Forward Character
PAD forward character
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#PADFWD=<char>[,<mode>]
Set command sets the char that immediately flushes pending data to
socket opened by AT#SD command
Parameters:
Name
Type
Default
Description
<char>
integer
1
specifies the ascii code of the char used to
flush data
Value:
0÷255
:
ascii code of the char used to flush data
<mode>
integer
0
flush mode
Values:
0
:
normal mode
1
:
reserved
Use AT#PADCMD to enable the socket char-flush activity
AT#PADFWD?
Read command reports the currently selected <char> and <mode> in the
format:
#PADFWD: <char>,<mode>