Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 285 of 1904 2022-03-04
Not Subject to NDA
3.2.4.2. ATQ - Quiet Result Codes
This command allows to enable or disable the result code.
ITU-T Recommendation V.25 ter
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
ATQ[<n>]
Set command enables or disables the result codes.
Parameter:
Name
Type
Default
Description
<n>
integer
0
enables/disables result
codes
Values:
0
:
enables result codes
1
:
disables result codes. The commands entered after
ATQ1 do not return the result code.
2
:
disables result codes (only for backward compatibility).
The commands entered after ATQ2 do not return the
result code.
If parameter is omitted, the command has the same behavior of
ATQ0.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English