Telit Wireless Solutions LE910C series - AT$SLPTYPE - Update SLP Type Address

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1687 of 1904 2022-03-04
Not Subject to NDA
3.28.1.12. AT$SLPTYPE - Update SLP Type Address
This command allows updating the SLP address type to be chosen.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$SLPTYPE=<slp_address_type>
Set command allows updating the SLP address type to be chosen.
Parameter:
Name
Type
Default
Description
<slp_address_type>
integer
1
SLP address type. This
parameter also updates during
$SLP set command.
Values:
0
:
IPv4
1
:
FQDN
3
:
IPv6
AT$SLPTYPE?
Read command returns the current SLP address type.
AT$SLPTYPE=?
Test command returns the range of values in the following format:
$SLPTYPE: (0,1,3)