Telit Wireless Solutions LE910C series - AT#BBNDDEL - BLE Bond Delete

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1885 of 1904 2022-03-04
Not Subject to NDA
3.35.27. AT#BBNDDEL - BLE Bond Delete
This command is used to delete the stored BLE bonding information.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#BBNDDEL=[<BD Address>]
Set command is used to delete the stored bonding information.
Parameters:
Name
Type
Default
Description
<BD
Address>
string
N/A
It specifies the remote Bluetooth
address.
Value:
1÷48
:
The supported parameter value range.
AT#BBNDDEL=?
Test command reports supported range of values for all parameters.
AT#BBNDDEL="008025D1D764"
OK
AT#BBNDDEL="*"
OK