LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 221 of 1904 2022-03-04
3.2.2.64. AT#IMEISV - Request IMEI and Software Version Number
This command returns the International Mobile Station Equipment Identity and Software
Version Number.
AT#IMEISV
Execution command returns the International Mobile Station Equipment
Identity and Software Version Number, identified as the IMEISV of the
module.
Additional info:
The IMEISV is composed of the following elements (each element
shall consist of decimal digits only):
- Type Allocation Code (TAC). Its length is 8 digits.
- Serial Number (SNR) is an individual serial number uniquely
identifying each equipment within each TAC. Its length is 6 digits.
- Software Version Number (SVN) identifies the software version
number of the mobile equipment. Its length is 2 digits.
AT#IMEISV=?
Test command returns OK result code.