Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1282 of 1904 2022-03-04
Not Subject to NDA
3.17.26. AT#NTPCFG - Configure NTP Parameters
This command allows to configure additional parameters to be used for NTP operations.
[1] Standard RFC5905
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#NTPCFG=<cid>[,<authType>[,<keyId>,<keysFilePath>]]
Set command allows to configure additional parameters to be used for
NTP operations.
Parameters:
Name
Type
Default
Description
<cid>
integer
N/A
Context id used to perform NTP
operations. Refer to test command
to know the supported range of
values.
Values:
1÷16
:
LE910Cx ThreadX: context id for NTP
operations
1÷6
:
LE910Cx Linux: context id for NTP
operations
<authType>
integer
0
Authentication type to be used with
NTP server
Values:
0
:
do not authenticate server
1
:
use symmetric key to authenticate server (see
standard [1]), using <keyId> and

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English