Telit Wireless Solutions LE910C series - AT#TCPATRUNCLOSE - Closes TCP Run at Socket

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1539 of 1904 2022-03-04
Not Subject to NDA
3.23.8. AT#TCPATRUNCLOSE - Closes TCP Run AT Socket
Execution command that closes TCPATRUN connection
Telit Running AT Commands Remotely Application Note, 80000NT10029a
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#TCPATRUNCLOSE
Closes the socket used by TCPATRUN connection.
TCPATRUN status is still enabled after this command, so the
service re-starts automatically.
AT#TCPATRUNCLOSE=?
Test command returns OK