Telit Wireless Solutions LE910C series - AT+CPOL - Preferred Operator List

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 405 of 1904 2022-03-04
Not Subject to NDA
3.4.15. AT+CPOL - Preferred Operator List
The command is used to edit or update the UICC preferred list of networks. The list is
read in the UICC file selected by the command +CPLS.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CPOL=[<index>]
[,<format>[,<oper>[,<GSM_AcT>,<GSM_Compact_AcT>,
<UTRAN_AcT>,<E_UTRAN_AcTn>]]]
Execution command writes an entry in the SIM list of preferred operators.
Parameters:
Name
Type
Default
Description
<index>
integer
N/A
the order number of operator
in the UICC preferred
operator list.
Value:
1÷n
:
order number in the list
<format>
integer
N/A
format for <oper> parameter.
Values:
0
:
long format alphanumeric <oper>
1
:
short format alphanumeric <oper>
2
:
numeric <oper>
<oper>
string
-
Operator Identifier.