Telit Wireless Solutions LE910C series - AT#SMSUCS - SMS Un-Change Status

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 681 of 1904 2022-03-04
Not Subject to NDA
3.6.28. AT#SMSUCS - SMS Un-Change Status
Set commands to keep the SMS status.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SMSUCS=<mode>
Set command allows to keep the SMS Status to UNREAD after +CMGR or
+CMGL.
Parameter:
Name
Type
Default
Description
<mode>
integer
0
Change/Not Change the SMS status
Values:
0
:
The SMS Status will change.
1
:
The SMS Status will not change.
AT#SMSUCS?
Read command returns the current value of the <mode> parameter.
AT#SMSUCS=?
Test command returns the supported values for parameter <mode>.