Telit Wireless Solutions LE910C series - AT#NOPT - Notification Port

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 319 of 1904 2022-03-04
Not Subject to NDA
3.2.4.20. AT#NOPT - Notification Port
Set notification(URC) message port
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT#NOPT=<num>
Set command specifies the port output notification (URC) messages
Parameter:
Name
Type
Default
Description
<num>
integer
0
Notification(URC) port
Values:
0
:
All Ports; URC messages are sent to all ports
1
:
UART 1 Port
2
:
Telit USB Modem 1 Port
3
:
Telit USB Modem 2 Port
4
:
UART 2 Port
5
:
Multiplexer DLCI1 Port
6
:
Multiplexer DLCI2 Port
7
:
Multiplexer DLCI3 Port
8
:
Multiplexer DLCI4 Port
URC messages sent out only on the configured ports by this
command.