Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 728 of 1904 2022-03-04
Not Subject to NDA
3.8.11. AT#WLANSECURITY - Add hostapd.conf file.
This command allows changing WLAN security parameters. Relevant for AP mode only
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#WLANSECURITY=<wpa>[,<key_mgmt>,<pairwise>,<key>]
Set command allows changing WLAN security parameters. Relevant for
AP mode only.
Parameters:
Name
Type
Default
Description
<wpa>
integer
N/A
Security type
Values:
0
:
Disable
1
:
WPA1
2
:
WPA2
3
:
WPA1 + WPA2
4
:
WPA3
<key_mgmt>
integer
N/A
Security type
Values:
0
:
WPA-PSK
1
:
WPA3-SAE
<pairwise>
integer
N/A
This controls wpa's data encryption.
Values:
0
:
TKIP

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English