Telit Wireless Solutions LE910C series - AT#DVICFG - Digital Voiceband Interface Configuration

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1034 of 1904 2022-03-04
Not Subject to NDA
3.12.6.4. AT#DVICFG - Digital Voiceband Interface Configuration
This command used to set the DVI configuration.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT#DVICFG=[<clock>[,<decoder pad>[,<decoder format>[,<encoder
pad>[,<encoder format>]]]]]
Set command sets the DVI configuration.
Parameters:
Name
Type
Default
Description
<clock>
integer
0
Clock speed for master mode
Values:
0
:
normal mode
1
:
high speed mode
<decoder pad>
integer
1
PCM padding enable in decoder
path
Values:
0
:
disable
1
:
enable
<decoder
format>
integer
2
PCM format in decoder path
Values:
0
:
u-Law
1
:
A-Law
2
:
linear