Telit Wireless Solutions LE910C series - AT$LCSLUI - Update Location Information

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1690 of 1904 2022-03-04
Not Subject to NDA
3.28.1.14. AT$LCSLUI - Update Location Information
Set command allows updating the Location information.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$LCSLUI=<update_type>
Parameter:
Name
Type
Default
Description
<update_type>
integer
1
Current access technology
Values:
0
:
GSM
1
:
WCDMA
The current access technology can be read with +COPS?.
This command has no effect and exists only for backward
compatibility.
AT$LCSLUI=?
Test command returns the range of values for parameter.