Telit Wireless Solutions LE910C series - AT\V - Single Line Connect Message

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 122 of 1904 2022-03-04
Not Subject to NDA
3.2.2.8. AT\V - Single Line Connect Message
This command sets single line connect message.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT\V[<n>]
Execution command sets single line connect message.
Parameter:
Name
Type
Default
Description
<n>
integer
0
set single line connect message
Values:
0
:
set OFF
1
:
set ON
if parameter is omitted, the command has the same behaviour of
AT\V0.