Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 243 of 1904 2022-03-04
Not Subject to NDA
3.2.2.75. AT#TXCAL4G - Change Max TX Power Level for a Supported Band
This command changes the maximum power level for the specified band.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#TXCAL4G=<band>[,<txPwrLev>]
Set command changes the tx power level for the specified band.
Parameters:
Name
Type
Default
Description
<band>
integer
-
number of the LTE band whose TX
maximum power level must be
changed. To know its range, use Test
command.
<txPwrLev>
integer
230
maximum TX power level for the band
specified, in 1/10dBm (230 = 23dBm). To
know its range, use Test command.
If <txPwrLev> is not specified, the
default value for maximum TX power
level is set for the band <band>
Value:
180÷250
:
maximum power level
<txPwrLev> input resolution is dBm10.(Qualcomm limitation)
LTE band 71 doesn't support resolution dBm10.(Qualcomm
limitation)
After command set, you have to reboot modem.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English