Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1272 of 1904 2022-03-04
Not Subject to NDA
3.17.22. AT#ICMP - Ping Support
Set command enables/disables the ICMP Ping support.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#ICMP=<mode>
Parameter:
Name
Type
Default
Description
<mode>
integer
1
ICMP mode
selection.
Values:
0
:
disable ICMP Ping support
1
:
enable firewalled ICMP Ping support: the module is
sending a proper ECHO_REPLY only to a subset of IP
Addresses pinging it; this subset of IP Addresses has
been previously specified through #FRWL command.
2
:
enable free ICMP Ping support; the module is sending
ECHO_REPLY to every IP Address pinging it.
AT#ICMP?
Read command returns whether the ICMP Ping support is currently
enabled or not, in the format:
#ICMP: <mode>
AT#ICMP=?

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English