Telit Wireless Solutions LE910C series - AT#M2 MATP - M2 M at Parser

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1641 of 1904 2022-03-04
Not Subject to NDA
3.27.8. AT#M2MATP - M2M AT Parser
This command enable/disable M2M AT Parser and M2M AT command set
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#M2MATP=<mode>
Set command enable or disable M2M AT Parser and M2M AT command set
Parameter:
Name
Type
Default
Description
<mode>
integer
1
enable or disable M2M AT parser and M2M
AT command set
Values:
0
:
disable
1
:
enable
If it configured, successfully, the device will reboot, automatically.
If it disabled, M2M AT command set are not available, below
+M2M
#M2MRU
N
#M2MLIST
#M2MREAD
#M2MREADEX
T
#M2MWRITE
#M2MDEL
#M2MMKDI
R
#M2MRMDI
R
#M2MCHDIR
#M2MBACKU
P
#M2MRA
M
#M2MARG
#TRACE
#DTR
#PSMCTS
#NTP
#NTPCFG
#PSMURC
#OTAUPW