Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1790 of 1904 2022-03-04
Not Subject to NDA
3.32.8. AT#MQTCFG - Configure Timeout Parameters for MQTT Transmission
This command sets the timeout options for the specified client.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#MQTCFG=<instance_number>,<packet_timeout>
Set command writes the timeout options for the specified client
Parameters:
Name
Type
Default
Description
<instance_number>
integer
N/A
Selects the client instance. The
list of available clients is
obtained with AT#MQEN? or the
read command.
Value:
1÷maxClients
:
client instance range. to know
maxClients value use test
command.
<packet_timeout>
integer
N/A
Timeout of the packet delivery.
Value:
1÷60
:
timeout range. value expressed in
seconds.
AT#MQTCFG?
Read command returns the timeout configuration of all active MQTT
clients in the format
#MQTCFG: <iinstance_number>,<packet_timeout>

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English