Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 723 of 1904 2022-03-04
Not Subject to NDA
3.8.7. AT#WLANSCAN - Scanning wifi networks
This command is used for scanning Wi-Fi networks.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#WLANSCAN=[<mode>]
Set command for client mode only for scanning for Wi-Fi networks.
Parameter:
Name
Type
Default
Description
<mode>
integer
N/A
Mode
Values:
0
:
Normal result
1
:
Extend result
AT#WLANSCAN=?
Test command returns the supported range of values for parameter
<mode>.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English