Telit Wireless Solutions LE910C series - AT#SD - Socket Dial

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1244 of 1904 2022-03-04
Not Subject to NDA
3.17.11. AT#SD - Socket Dial
This command opens a remote connection via socket.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SD=<connId>,<txProt>,<rPort>,<IPaddr>[,<closureType>[,<lPort>[,<connMode>
[,<txTime>[,<userIpType>]]]]]
Execution command opens a remote connection via socket.
Parameters:
Name
Type
Default
Description
<connId>
integer
N/A
Socket connection identifier
Value:
1÷conMax
:
supported range (conMax value is
returned by test command)
<txProt>
integer
N/A
Transmission protocol.
Values:
0
:
TCP
1
:
UDP
<rPort>
integer
N/A
Remote host port to contact.
Value:
1÷65535
:
remote host port number
<IPaddr>
string
-
IP address of the remote host:
- any valid IP address in the format:
"xxx.xxx.xxx.xxx"